Humana Region Specific Map

5 things Lantech case erectors do to guarantee every case is square:

1. Eight vacuum powered suction cups hold the case blank after it leaves the magazine. Both of the blank’s leading panels are held securely by the powerful vacuum. The suction cups can be moved so they’re in the best positions to control different size blanks.

2. The suction cups are part of our specially designed pick-up frame that guarantees the case’s horizontal angles are 90 degrees – or, in other words, the pick-up frame forces the case to open so it’s perfectly square.

3. Once the case is square, it remains square in the case erector by folding the flaps while it’s stationary. This makes the case rigid and locks in the 90 degree angles.

4. Then, and only then, does a pusher bar that’s parallel to the rear wall of the case push it into the sealing section’s side belts.

5. The side belts are “spring loaded” to automatically adjust for any differences in case to case widths caused by manufacturing variations in the case blanks. This ensures that “squareness” is maintained as the case’s bottom flaps are securely sealed.

Square cases are building blocks to protecting your products as they travel to their points of sale. Lantech case erectors ensure that you get maximum value from these corrugated guardians.